2 port 10/1000Mbps unmanaged Industrial POE Fiber Media Converter
Introduction of 2 port outdoor poe switch
IM-PC111GE series is the 10/100/1000 Mbps industrial POE fiber media converter, comply with IEEE802.3af/at, power on POE IP cameras through the Ethernet cable, simple construction, power range up to 100 meters, operating temperature-40 ℃ to + 75 ℃, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.
Product Features of unmanaged POE switch
- Low power consumption, fan-less design, metal shell.
- Self-developed power supply, high redundancy design, providing a long term and stable PoE power output.
- CE, FCC, RoHS.
- The user-friendly panel, it can show the device status through the LED indicator of PWR,SYS, Link, PoE.
Specifications of 10/100/1000Mbps POE Switch
| Product Name | 10/100/1000Mbps Industrial POE Fiber Media Converter (1F+1TP) | | Model No. | IM-PC111GE | | Port | 1 x 1000Mpbs SFP port SM:1310nm/1550nm,20Km 1490nm/1550nm,40~120Km MM:1310nm,2Km 1x10/100/1000M UTP RJ45(Support MDI/MDIX auto-sensing) | | Switching features | Transmission mode:storage and forward
System bandwidth:40Gbps (non-traffic jam) | | Network media | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤10meter) 1000BASE-TX: Cat6 or later UTP(≤100 meter) | | LEDs | Power, network, fiber | | Flow Control | Back pressure for half duplex, IEEE 802.3x pause frame for full duplex | | Environment | Working temperature:-40°～ 75°C
Storage temperature:-40°～ 85°C
Working humidity:10%～90%,non-condensing
Storage humidity:10%～95%,non-condensing | | Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A
EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8
Traffic Control:NEMA-TS2
Vibration:IEC 60068-2-6
Freefall:IEC 60068-2-32
Shock:IEC 60068-2-27
Rail Traffic:EN 50121-4 | | Safety | CE Mark ,commercial
CE/LVD EN60950 | | Shell | Corrugated metal shell | | Packaging Details | Each product is packed in a high quality PE bag, Then put into a box or carton. | |
Application
Dimension
Production steps
- Welding: Weld the necessary components
- Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
- Assembling: Builds up components of a product, like panels, screws, PCB boards.
- Testing: To make sure the product is basically working fine after assembling
- Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
- Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
- QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
- When all above is done, the product will go to market.
Why choose us?
1. All products are under strict quality control and well tested for 3 times before shipment;
2. According to the survey, the repair rate of our products is 3% ~ 5%, which is the lowest in the peer.
3. Any problem, pls feel free to contact us.
4. The warrany of the commercial products is 1 years while the industrial products is 3 years.
