Shenzhen iseelink Communication Technology Co., Ltd.
Shenzhen iseelink Communication Technology Co., Ltd.
Add to Cart
6 port unmanaged Industrial ethernet Switch
Introduction of 6 port industrial ethernet switch
Product Features of unmanaged network switch
· 6 x 10/100Mbps Auto-sensing RJ45 ports
· 4 KV Ethernet surge protection, adapt to a harsh outdoor environment
· Support Auto MDI/MDIX
· Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
· IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
· A store-and-forward switching mechanism
· Operating environment temperature:-40 ° ~85 ° c
Specifications
| Product Name | 10/100/100Mbps Industrial Ethernet Switch (6TP) |
| Model No. | IM-WS060FE |
| Port | 6 x10/100M UTP RJ45(Support MDI/MDIX auto-sensing) |
| Switching features | Transmission mode:storage and forward System bandwidth:40Gbps (non-traffic jam) |
| Network media | 10BASE-T: CAT3, CAT4, CAT5 un-shielded twisted pair(≤100m) 100/1000BASE-TX: CAT5 or above shielded twisted pair(≤100m) |
| LEDs | Power, network |
| Power supply | Input voltage:DC 9-36V No-load power:5W Reverse connection:support |
| Environment | Working temperature:-40°～ 75°C Storage temperature:-40°～ 85°C Working humidity:10%～90%,non-condensing Storage humidity:10%～95%,non-condensing |
| Industry Standards | EMI:FCC Part 15 Subpart B Class A,EN 55022 Class A EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8 Traffic Control:NEMA-TS2 Vibration:IEC 60068-2-6 Freefall:IEC 60068-2-32 Shock:IEC 60068-2-27 Rail Traffic:EN 50121-4 |
| Safety | CE Mark ,commercial CE/LVD EN60950 |
| Mechanical information | Shell:Corrugated metal shell Safety class:IP40 Dimension: 113.8 x 93 x 34.9mm Mounting method:Din-rail mounting |
| Warranty | Replacement within 1 year; 3 years repairing |
Application
Packing List
· 1pc optical fiber bypass switch
· 1pc user manual
· 1pc warranty card
Production procedure:
1. Welding: Weld the necessary components
2. Cleaning: To avoid any possible dysfunction due to dust or scraps on the PCB boards.
3. Assembling: Builds up components of a product, like panels, screws, PCB boards.
4. Testing: To make sure the product is basically working fine after assembling.
5. Aging: To check if the product can work smoothly for long time without any minors such as LED indicators, voltage. This will usually last for 24 to 48 hours.
6. Testing: To test if the product can process data or video signals correctly. Any data loss? Transmission rate correct? Any data packet failure? Such questions would be verified in this procedure.
7. QC testing: This is the third and also last check of product quality. If it goes good, our packing staff will pack it up according to customer requirements and attach to the packing box a product label.
8. When all above is done, the product will go to market.