
Add to Cart
OSW1×64 RS232 SM optical fiber switch
Introduction of OSW 1*64 optical fiber switch
Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Applications of SM optical fiber switch
Specifications
Parameters | Unit | OSW1×64 | |
Wavelength Range | nm | 850±40 / 1300±40,MM | 1260 ~ 1650 SM |
Test Wavelength | nm | 850 / 1300,MM | 1310 / 1550 SM |
Crosstalk | dB | ≥ 70 | |
PDL | dB | ≤ 0.05 | |
WDL | dB | ≤ 0.25 | |
TDL | dB | ≤ 0.25 | |
Repeatability | dB | ≤ ±0.05 | |
Durability | Cycles | ≥ 10 Million | |
Switching Time | ms | ≤ 10(Sequence switch time of adjacent channel) | |
Optical Power | mW | ≤500 | |
Operating Temperature | ℃ | -5 ~ +70 | |
Storage Temperature | ℃ | -40 ~ +85 | |
Relative Humidity | % | 5 ~ 95 |
Pin Configurations
RS232 DB-15 male connector
Pin No. | Signal Name | I / O | Description |
2 | Sout | Output | RS232 data Tx |
3 | Sin | Input | RS232 data Rx |
5 | Sgnd | Input | RS232 Ground |
8 | +5VDC | Input | 5.0±5% VDC Power Supply (max 800mA) |
9 | GND | Input | Ground |
1,4,6,7,10, 11,12,13,14,15 | NA |
Serial port settings: 9600 baud rate, 8 bit data bits, 1 bit stop bits, no parity check.
Optical Route
Ordering Information: 7202-1×64L-R-A-B-C-D-E-F-G
Example:7202-1×64L-R-SM-FS-5-90-12-02M-FA
A | B | C | D | E | F | G |
Fiber Type | Test Wavelength | Operating Voltage | Tube Type | Fiber Length | Dimension | Connector |
SM: SM, 9/125 M5: MM, 50/125 M6: MM, 62.5/125 X: Others | 85: 850±40nm O: O band(1260~1360nm) C: C band(1530~1565nm) L: L band(1565~1625nm) U: U band(1625~1675nm) FS: 1260~1650nm | 5:5V | 25: 250um 90: 900um 20: 2mm 30: 3mm X: Others | 05: 0.5m±5m 10: 1.0m±5m 12: 1.2m±5m 15: 1.5m±5m X: Others | 01: 135×40×32-DB9 02: 135×60×32-DB9 X: Others x=F:female M:male | OO: None LP: LC/PC LU: LC/UPC LA: LC/APC FP: FC/PC FU: FC/UPC FA: FC/APC SP: SC/PC SU: SC/UPC SA: SC/APC STP: ST/PC STA: ST/APC X: Others |
Our Advantage:
1. Manufacturing: We are a powerful factory and has been in this industry about 10 years
2. Professional R&D center: We have a professional and independent R&D team. Most our engineers have more than 5 years experience.
3. Fast dispatch: Most of the products are in stock. Below 10pcs can arrange delivery with 3 years.
4. Small order accepted: Low MOQ accepted. 1pcs are availabel.
5. Insurance: all products 3 years warranty.