Shenzhen iseelink Communication Technology Co., Ltd.
Shenzhen iseelink Communication Technology Co., Ltd.
Add to Cart
OSW1×48 RS232 SM optical fiber switch
Introduction of OSW 1*48 optical fiber switch
Optical switch is a kind of functional component, with the ability of switching optical route. In optical fiber transmission system, it is used for multi-channel fiber monitoring, multi light source/ detector selection, and optical fiber path protection etc. Besides, it is also used in optical fiber test system for optical fiber and its component test, outdoor cable test and multi-spot optical sensors monitoring system.
Product Features of RS232 optical switch
·More Than 128 Channels
·Low Loss and High Reliability
·RS232 Interface
·Modularized Design
·Epoxy-free on Optical Path
Specifications
| Parameters | Unit | OSW1×48 | |
| Wavelength Range | nm | 850±40 / 1300±40,MM | 1260 ~ 1650 SM |
| Test Wavelength | nm | 850 / 1300,MM | 1310 / 1550 SM |
| Return Loss | dB | MM ≥ 30 SM ≥ 50 | |
| PDL | dB | ≤ 0.05 | |
| WDL | dB | ≤ 0.25 | |
| TDL | dB | ≤ 0.25 | |
| Repeatability | dB | ≤ ±0.05 | |
| Durability | Cycles | ≥ 10 Million | |
| Switching Time | ms | ≤ 10(Sequence switch time of adjacent channel) | |
| Operating Temperature | ℃ | -5 ~ +70 | |
| Storage Temperature | ℃ | -40 ~ +85 | |
| Relative Humidity | % | 5 ~ 95 | |
Pin Configurations
RS232 DB-15 male connector
| Pin No. | Signal Name | I / O | Description |
| 2 | Sout | Output | RS232 data Tx |
| 3 | Sin | Input | RS232 data Rx |
| 5 | Sgnd | Input | RS232 Ground |
| 8 | +5VDC | Input | 5.0±5% VDC Power Supply (max 800mA) |
| 9 | GND | Input | Ground |
| 1,4,6,7,10, 11,12,13,14,15 | NA |
Serial port settings: 9600 baud rate, 8 bit data bits, 1 bit stop bits, no parity check.
Optical Route
Dimension(DBx male head or female head is defined as the actual mark of the element)
Ø 02: 150×80×67-DB15 (N≤64, DB-15 male)
Packing List
· 1pc optical fiber bypass switch
· 1pc user manual
· 1pc warranty card